Washer & Dryer Repair Services in Southwestern Ontario
Professional Washer & Dryer RepairWhen your washing machine stops spinning or your dryer suddenly stops heating, laundry can pile up quickly. Some laundry appliance problems are simple, while others require testing several components to identify the actual cause.
IAS Repair provides professional washer and dryer repair services throughout Cambridge, Kitchener, Waterloo, Brantford, Woodstock, Guelph, Stratford, London, and surrounding Southwestern Ontario communities.
Our technicians diagnose the appliance based on its symptoms, operating cycle, error codes, component testing, and the condition of the installation rather than replacing parts based only on the symptom.
Call IAS Repair at 519-340-2255 to schedule washer or dryer repair service.
Washing Machine Repair
Modern washing machines use multiple systems working together, including water valves, pumps, motors, sensors, door locks, controls, suspension components, and heating systems.
A problem with one component can produce symptoms that appear to be caused by something completely different.
For example, a washer that refuses to spin may actually have a drainage problem, an unbalanced-load condition, a door-lock issue, a motor problem, or another fault.
That is why proper diagnosis is important before replacing expensive components.
Ask Us
Common Washing Machine Problems
Washer Will Not Start
If the washing machine does not respond when you press the controls, the cause may involve:
- Electrical supply
- Door or lid lock
- User interface
- Main control
- Wiring
- Power-related components
- Another internal fault
A completely dead washer should be tested before assuming the control board has failed.
Washer Not Filling With Water
A washer that starts a cycle but does not fill may have a problem with the water supply or one of the appliance's internal components.
Possible causes include:
- Closed water supply valves
- Restricted water hoses
- Inlet valve problems
- Water-pressure issues
- Door or lid lock problems
- Water-level sensing problems
- Control-related faults
Checking whether hot and cold water are available can provide useful information during diagnosis.
Washer Not Draining
Standing water inside a washing machine after a cycle is a common reason for a service call.
Possible causes include:
- Blocked drain pump
- Foreign object
- Restricted drain hose
- Pump failure
- Wiring problem
- Control issue
- Plumbing restriction
A washer that cannot drain properly may also refuse to enter the spin cycle because the appliance detects that water remains inside.
Washer Not Spinning
A washer that fills and washes but does not spin can have several possible causes.
Depending on the model, technicians may need to investigate:
- Drainage problems
- Door or lid lock
- Motor
- Drive system
- Suspension components
- Load imbalance
- Control system
- Wiring
- Speed or position sensing
The reason for a no-spin condition can vary significantly between washer designs.
Washer Shaking or Walking Across
Excessive movement during spin is a common problem, particularly with high-speed front-load washers.
Possible causes include:
- Washer not properly leveled
- Unbalanced load
- Worn suspension components
- Damaged shocks
- Spring problems
- Bearing issues
- Installation or flooring conditions
If the washer has recently been installed, leveling and installation should be checked first.
If the machine suddenly starts shaking after previously operating normally, a mechanical problem may need to be investigated.
Washer Leaking Water
Water leaking from a washing machine should not be ignored.
Leaks can originate from:
- Door gasket
- Water inlet hoses
- Drain hose
- Water inlet valve
- Dispenser system
- Drain pump
- Tub components
- Internal hoses
- Other connections
The location where water appears on the floor may not be the same location where the leak begins.
What
We did?
This is our result from
2021 up to now.
BROKEN APPLIANCE ?
Call us today and get your appliance repaired in 3 simple steps.
What people say about us
We have more than 15K+ clients and counting.
